3
Step 3: Using the Option
During operation, cut labels will be dispensed after printing. Begin using the option as follows:
A)
Load
Media
(see the
Operator’s Manual
for
details). Then, route the
Media
out the
Cutter
Opening
.
B)
Plug the power cord into the AC Receptacle and
turn ‘On’ the Power Switch.
Cutter
Opening
Media
C)
Ensure that READY is displayed on the
Front
Panel
then press the
FEED Key
, and proceed
according to your observations:
If a cut label is dispensed, this completes the
installation; or,
If the label feeds forward without being cut,
proceed to Step 4: “Configuring the Printer.”
FEED
Key
Front Panel
Note: The operation of the Cutter can also be controlled by host software commands, so ensure
that your labeling program is properly configured for use, and for cutting labels to the desired
size.
