7
Special Functions
Items 1 (Prn Menu), 6 (Quick Cal), 10 (Entr Hex Dump) and 11 (Prn Full Config) are special functions.
They work as follows:
1. Two seconds after the item is selected, the right LED will illuminate red.
2. To invoke the function, press the button once. The function will execute immediately, without a 10
second waiting period.
To cancel the function, do not press the button, and wait 10 seconds. The left LED will blink green slowly
to indicate that the top of the Paper Menu has been accessed.
Quick Cal
When Item 6, Quick Cal, is invoked, the paper will start moving immediately. When the function has
completed, the LEDs will display the result as follows:
Passed:
Left LED blinks green briefly
Warning:
Left LED blinks orange briefly
Fail:
Left LED blinks red briefly
Hex Dump
Invoking this function exits the paper menu. To terminate the Hex Dump, cycle power to the
printer.
Menu Exit
To exit the menu, press and hold the button for five seconds, the LED will stop blinking. Then release the
button, the printer will then be ready for normal operation.
When the printer first enters the menu, the printer setting for the Index Mode is set to Continuous Mode
and the Media type is set to Direct Thermal. The two original setting are preserved and restored upon
proper exit from the menu system. If the user exits the menu via a power cycle the original settings will
not be restored and the user will have to manually reset these.
Summary of Contents for E-Class Mark III
Page 2: ...2 From the Power On State...
