2
This guide presents a systematic overview of important media requirements, setup options, and modes of
use for A-Class
Mark II
RFID-equipped printers.
Note:
To use the RFID option, the printer’s firmware version must be 12.03 or greater. Downloads can be
found at
ftp://ftp.datamax-oneil.com/Printer Firmware
.
Step 1: Know the RFID Media
Ensure that your UHF RFID media meets the following specifications:
Smart Label and Tag Requirements
[1]
Layout
C
D
E
B
A
Forward
Movement
Definitions
[2]
Designator
Description
Dimension (inches)
Dimension (millimeters)
A Label
Width
4.00
101.6
B
Label Lengths
2.00, 4.00, & 6.00
50.8, 101.6, & 152.4
C
Chip Location Tolerance
± 0.05
± 1.3
D
Label Pitch (minimum)
1.70
57.2
E
Chip Inlay Location
1.10
27.9
[1]
See the
Operator’s Manual
for additional standard media requirements.
[2]
Definitions referenced while looking down onto the labeling side of the media, and from the leading edge of the
label (or tag) in the print direction.
Note:
If you have questions regarding media selection, contact a Datamax-O’Neil Media Representative at
(407) 523-5650.
Summary of Contents for A-Class Mark II
Page 1: ...RFID Quick Start Guide 92 2538 01 Rev B...
Page 2: ......
