Datamax 123 Print v1.1 User Manual Download Page 46

Page: 46 / 226

www

.mcl-collection.com

Chapter 3 : Creating a Project

the front panel and a barcode scanner, or from just the front panel.

If you choose Qty Using Front Panel, the user must use the
Fwd

↑

and Rev

↓

buttons on the front panel to increment or

decrement the quantity.

If you choose Qty Using Keyboard, keyboard and front panel
input is enabled; the user may input a quantity from the
keyboard or use the Fwd

↑

and Rev

↓

buttons on the front

panel to increment or decrement the quantity.

If you choose Qty Using Barcode Reader, the user can scan
the quantity or use the Fwd

↑

and Rev

↓

buttons on the front

panel to increment or decrement the quantity.

Click OK

Graphical Display -

Large

The graphical display Select Quantity Screen is equivalent to the text

display Quantity to Print Screen.

To edit the Select Quantity screen, on the User Interface window:

Click on the Select Quantity screen, or

Click the Quantity

button at the bottom of the window

Alternatively, on the User Interface window:

Simply double click on the thumbnail view of the Select Quantity
screen

The Select Quantity Screen editing window for a large graphical display

printer is as shown here:

Notice that this screen has the same display screen editing options — a
Header, Footer and two lines on the main display — as those described
in

Section 3.2.1 – Graphical Display Elements

The two lines of main display text show, by default, the same content
on the Quantity to Print screen for both the text display and graphical
display printers:

Fixed user prompt “Select quantity to print” and

The option “Qty Using Front Panel”

October 2007

Page

Summary of Contents for 123 Print v1.1





























































































































































































































Search results

Summary of Contents for 123 Print v1.1

Reviews:

Datamax 123 Print v1.1, User Manual, Page: 46 / 226

Search results

Summary of Contents for 123 Print v1.1

Reviews: