Datamax 123 Print v1.1 User Manual Download Page 158

Page: 158 / 226

www

.mcl-collection.com

Chapter 5 : Using Processes

5.7.2.

Serial Out

General introduction

The Serial Out process allows you to create an output process that

sends data out a serial com port to an auxiliary device.

The format of the data to be sent is defined here.

Serial Out

To send data to an auxiliary port, proceed as follows:

Add the process Serial Out to your label program

Select the Communication Port that this process will use to send
the data.

In the Start with box, click the appropriate character to be used
as the first character in the data stream to be transmitted :

None if you do not want to wait for a special start character.

STX if you want to wait for a Start of Text character.

In the End with box, click the appropriate character to be used to
terminate the data stream to be transmitted:

ETX if you want an End-of-Text character as the stop
character.

CR/LF if you want a Carriage Return/Line Feed as the stop
sequence.

In the Data area, select the variable(s) to send or type the text to
send.

Click OK

Example

In this example, serial com 2 is used to send a stream of data. The

transmission begins with a start-of-text character followed by the
contents of the variables [E3], [E4], [E5], [E6] and [E7]. The
transmission is terminated with carriage return/line feed.

October 2007

Page

158

Summary of Contents for 123 Print v1.1





























































































































































































































Search results

Summary of Contents for 123 Print v1.1

Reviews:

Datamax 123 Print v1.1, User Manual, Page: 158 / 226

Search results

Summary of Contents for 123 Print v1.1

Reviews: