DATAMARS
R-IN 1300 MID User Manual – Rev
3.0
10 (40)
*pn-25 (for negative values: use ‘-‘)
*pn25 (for positive values do not use ‘+’)
NB: Customers are not allowed to modify the value of this
setting (Datamars-Customer-Support only)
3.4
I-C
ODE
I
SETTINGS
*nt[_]
Time slots I-Code I:
0
single time slot
1
4 time slots
2
8 time slots
3
16 time slots (default)
4
32 time slots
5
64 time slots
6
128 time slots
7
256 time slots
3.5
USB
S
ETTINGS
The USB-device can be used to emulate a serial-connection or a mass storage. Using the USB-
device like a “mass storage emulator”, it is possible to write the detected UIDs into a formatted file
(journal-file). The file-format per default is CSV so that the journal-file can be opened with “Microsoft
Excel”.
The generic format of journal-file looks like this:
UID0 <line-separator>
UID1 <line-separator>
UID2 <line-separator>
UID3 <line-separator>
…
The customer can configure the “line-separator” and the extension of the journal-file.
Note:
Refer to chapter 5.2 to get information on how to retrieve and handle the journal-file.
*us[_]
USB usage:
*us0 USB disabled
*us1 USB serial emulation
*us2 USB mass storage emulation (MID Plus only)
*jf[_]
Journal-file format:
*jf0 csv-format (default)
*jf1 customized format
*fs[_]
Field-separator:
Valid values: sequences of characters (max. length = 10 )
To specify “Carriage-Return”, type “\r”
To specify “New-Line”, type “\n”
To specify “Horizontal-Tab”, type “\t”
*ls[_]
Line-separator:
Valid values: sequences of characters (max. length = 10 )