background image

Battery 0.17 J, 0.33 J 9 V Energizer Value Service Guide 

Issue 4, 08/2020 

 

2 of 18 

 

 

 

 

Servicing of these components is only to be performed by qualified personnel. 

 

 

 

 

This symbol on the product or its packaging indicates that this product (and its battery) must not be 
disposed of with other waste. Instead, it is your responsibility to dispose of your waste equipment by 
handing it over to a designated collection point for the recycling of waste electrical and electronic 
equipment. The separate collection and recycling of your waste equipment at the time of disposal 
will help conserve natural resources and ensure that it is recycled in a manner that protects human 
health and the environment. For more information about where you can drop off your waste 
equipment for recycling, please contact your local city recycling office or the dealer from whom you 
purchased the product. 

 

For instructions on how to dismantle this product for recycling, email 

[email protected] 

 

 

 

© 2020 Datamars Limited. 

All product names and brand names in this document are trademarks or registered trademarks of their respective 
holders. 

No part of this publication may be photocopied, reproduced, stored in a retrieval system, or transmitted in any 
form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written 
permission of Datamars Limited. Product specifications may change without prior notice. 

For more information on other quality Datamars brands and products, visit 

datamars.com

 

Datamars Ltd 
25 Carbine Road 
Mt Wellington 
Auckland 1060 
New Zealand 

Postal address: 
P O Box 51078 
Pakuranga 
Auckland 2140 
New Zealand 

 

 

 

All trademarks with an * are neither owned by nor licensed to Datamars SA and belong to their respective owners. 

Summary of Contents for Livestock Speedrite SV170



















Reviews: