background image

Battery 0.17 J, 0.33 J 9 V Energizer Value Service Guide 

Issue 4, 08/2020 

 

18 of 18 

 

 

 

 

Read full instructions before use. 

 

This symbol on the product or its packaging indicates that this product must not be disposed of with other 
waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a 
designated collection point for the recycling of waste electrical and electronic equipment. The separate 
collection and recycling of your waste equipment at the time of disposal will help conserve natural 
resources and ensure that it is recycled in a manner that protects human health and the environment. For 
more information about where you can drop off your waste equipment for recycling, please contact your 
local city recycling office or the dealer from whom you purchased the product. 

 

Battery energizers that cannot be connected to mains-operated equipment 

Do not connect to mains-operated equipment such as battery chargers. 

 

 

Fence output terminal. Connect the fence output terminal to the fence. 

 

Fence earth terminal. Connect the fence earth terminal to the energizer earth system. 

 

Risk of electric shock! This energizer should be opened or repaired only by qualified personnel. 

 

The energizer has a double-insulated construction. 

 

Energizers that can be connected to a battery or a specified power adaptor 

Only use with a Datamars Ltd approved power adaptor. This must be either the power adaptor provided 
with the energizer or a genuine replacement part supplied by Datamars (see details marked on the 
energizer, beside the power inlet). 

 

 

DANGER! RISK OF ELECTRIC SHOCK. INDOOR LOCATIONS ONLY 

 

 

Summary of Contents for Livestock Speedrite SV170



















Reviews: