Dataman 448PRO2AP, User Manual, Page: 20 / 160

20
Introduction
DATAMAN 448PRO2AP is the core for automated programmers and automatic test
equipments (ATE). It is super fast universal 4x 48-pindrive concurrent multiprogramming
system designed for high volume production programming.
DATAMAN 448PRO2AP consist from four DATAMAN 48PRO2 based independent
programming modules. The chips are programmed at near theoretical maximum programming
speed.
DATAMAN 448PRO2AP is an industrial version of DATAMAN 448PRO2 programmer for
usage in automated programmers. The differences are:

the dimensions of the DATAMAN 448PRO2AP programmer are reduced - compared to the
DATAMAN 448PRO2 - in intent to minimize overhead of the handler's arm movement
 more mechanically stable case to be immune against vibration during operation. The case of
DATAMAN 448PRO2AP is prepared to be fastened from top or from bottom of programmer
body into automated programmer working place

different construction of programming modules, stable enough for insert/replace chips by
mechanical arm and also that allow to keep identical position of ZIF socket also after
replacing of the module
Two DATAMAN 448PRO2AP units can be attached to one control PC to better utilize
programming workplace. DATAMAN offer Windows XP Embedded driven DATAMAN
448PRO2AP control unit, which is able serve two DATAMAN 448PRO2AP programmers.
DATAMAN 448PRO2AP can be implemented into automated programmer (as a replacement
of obsolete programmer) or into some handler by two ways:
1. using of standard PC, for example DATAMAN 448PRO2AP can be connected to the
control PC of automated programmer (up to 2 DATAMAN 448PRO2AP can be attached to
one computer using USB hub or USB ports of the PC).
2. using DATAMAN 448PRO2AP control unit (option)

Up to 2 DATAMAN 448PRO2AP programmers are controlled by DATAMAN 448PRO2AP
control unit. The DATAMAN 448PRO2AP control unit is Windows XP Embedded
driven computer, optimized for industrial environment.
 One DATAMAN 448PRO2AP control unit in the system serve as a master unit. Here is
running also multiprogramming control software, serialization engine and interface to the
host system.
 Interfacing of DATAMAN 448PRO2AP control units is done over standard LAN and
external LAN switch. Interfacing of DATAMAN 448PRO2AP master control unit and host
systems is over LAN or RS232 (other interface on request).
Implementation of DATAMAN 448PRO2AP into available 3rd party automated programmers
and handlers is using simple remote control of the PG4UWMC control software. There exist
examples of implementation for standard programming languages and of course we are ready
to help customer with this task.
Note: For other (standard) parameters of DATAMAN 448PRO2AP programmer, see
description of DATAMAN 448PRO2 please.