Datalogic WEC7 OS, User Manual

Page: 219 / 258

User’s Manual 211
Maintenance
Cleaning the Device
Periodically clean the Skorpio X4 device using a soft cloth slightly
dampened with only water or Isopropyl Alcohol (70%). Do not use any
other cleaning agents (e.g. different alcohol, abrasive or corrosive
products, solvents) or abrasive pads to clean the device.
Dock Contacts Cleaning Procedure
All exterior metal contacts/connectors exposed to spills, dirt or
debris accumulation require periodic cleaning to ensure best
performance during charging and data transmission.
Use a soft, lint-free dry cloth or lens tissue to clean the product
(contacts and plastics). An antistatic cloth is preferable but you can
also use a cotton cloth. Avoid wool, synthetic cloths or other
materials that can cause electrostatic discharges.
If the contacts are very dirty, clean them with a soft cloth moistened
with a diluted non-aggressive cleaning solution or a diluted
isopropyl alcohol solution (20% maximum). A cotton swab may be
used only on hard-to-reach contacts.
Clean the contacts when you see traces of dirt or when you
experience solid connection issues between the terminal and its
dock (device not charging or intermittent communications). It is
however suggested to clean the contacts every 6 months (more
often if the environment is dusty).