Datalogic Skorpio X5 User Manual Download

Page: 44 / 124

GETTING STARTED

SKORPIO™ X5

Grid

If enabled, it divides the frame of your photos using four lines which run horizontally
and vertically along the screen.

Video Camera

These settings apply only to the video camera.

Video quality

Sets the video quality to HD 1080p (default), HD 720p, SD 480p, VGA, CIF, or QVGA.

Video duration

Set the video duration to: 30 seconds (MMS), 10 minutes (default), 30 minutes, or no

limit.

Image Stabilization

Select to reduce blurry videos due to device movement.

Noise Reduction

Reduces noise in your pictures (bright spots, randomly-spaced bright pixels, or fog). The
options are: Off (default), Fast, High Quality.

Video Encoder

Sets the video encoder to: MPEG4, H264 (default), H265.

Audio Encoder

Sets the audio encoder to: AMRNB, or AAC (default).

Video Rotation

Select to rotate your video.

Time Lapse

Sets the time lapse interval.

Video High FrameRate

Sets the high frame rate to Off (default), HFR 60, or HSR 60.

System

Restore default

Select to restore all settings to the default values.

Version Info

Displays the software version of the camera.

Summary of Contents for Skorpio X5





























































































































Search results

Summary of Contents for Skorpio X5

Reviews:

Related manuals for Skorpio X5

Brands by name

Popular brands

Datalogic Skorpio X5, User Manual

Search results

Summary of Contents for Skorpio X5

Reviews:

Related manuals for Skorpio X5

Brands by name

Popular brands