Datalogic Skorpio X4 User Manual Download

Page: 22 / 258

Introduction

Skorpio™ X4

94ACC1380

Power supply for Skorpio X3/X4, for direct charge.

94ACC1381

Power supply for single slot dock, regional plugs
included.

Batteries

94ACC0046

Battery, 5200 mAh High Capacity, Skorpio X3/X4 (1
included with main device for pistol grip models).

94ACC0048

Battery, 3000 mAh Standard Capacity, Skorpio
X3/X4 (1 included with main device for handheld
models).

Cables

94A051020

Cable for dock-PC (RS232) communication.

94A051968

Cable from Micro USB (dock) to USB. Device works
as client. 2m straight cable.

94A051969

Cable from Micro USB (dock) to female USB. Device
works as host. 1m straight.

94A051970

Cable from device (Handylink) to USB. Device
works as client. Connects to PC, 2m straight cable.

94A051971

Cable from device (Handylink) to female USB.
Device works as host. Connects to printers or
most other peripherals. 15cm straight cable.

94A051972

Cable from device (Handylink) to female DB9
RS232. Null Modem Cable. Connects to PC. 2m
straight cable.

94A051973

Cable from device (Handylink) to male DB9 RS232.
Straight through cable, Power on Pin 9 (5V @
500mA). Connects to printers, scanners, or most
other peripherals. 15cm straight cable.

94A051975

Car Adapter for PMD (to supply power to PMD
from the cigarette lighter). 2m straight cable.

Summary of Contents for Skorpio X4



































































































































































































































































Search results

Summary of Contents for Skorpio X4

Reviews:

Related manuals for Skorpio X4

Brands by name

Popular brands

Datalogic Skorpio X4, User Manual

Search results

Summary of Contents for Skorpio X4

Reviews:

Related manuals for Skorpio X4

Brands by name

Popular brands