SG-PSB INSTRUCTION MANUAL
2
GENERAL INFORMATION
The SG – PSB accessory is a guard, which comprises a drawn aluminium column and a
steel base. The base is made of two plates. Their inclination can be adjusted by means of
three dowels and their angular position can be adjusted through 3 rough adjustment slots
and 3 fine adjustments slots. Thanks to its single drawn section, available in a range of
different lengths, and to its multi-purpose grooves, this accessory can contain inside it all the
models of the SE, SG2, SG4, SE Body and SG Body series.
CHARACTERISTICS
Protects the light curtain mounted inside it from accidental collisions;
Single painted drawn aluminium section in different lengths, suitable for all heights of the
following series: SE, SG2, SG4 (150 – 1800 mm), SE Body and SG Body (2, 3 and 4-
beam);
Sturdy steel base made of 2 plates with angle reference marks, dowels for adjustment of
the vertical axis and slots for angular position adjustment;
Spheric level to facilitate adjustment of the vertical axis;
Double rear groove for installation of external muting sensor supports.
TYPICAL APPLICATIONS
Use of the SG-PSB accessory is recommended in work environments typical of the material
handling market, where forklift trucks, AGVs or other vehicles move freely within the plant
and may collide with the safety light curtains.
Fig. 1
