Datalogic SD9030, Quick Reference Manual, Page: 8 / 24

Connecting to a Host
4 SD9030 Dongle
Connecting to a Host
The SD9030 Dongle can be connected to a Host with its
USB cable. In the picture below it is connected to a Data-
logic Vehicle Mount Computer, but it can be connected to
any PC or Industrial PC with a USB port.
Simply connect the SD9030 Dongle to a free USB port of
the Host.
Connecting a Datalogic PowerScan™
PM9X00 to the SD9030 Dongle
Simply take your Datalogic PowerScan™ PM9X00 scanner
and scan the link label on the backside of the SD9030
Dongle or scan one of the adhesive labels provided in the
package.
Restore Default Radio Protocol
By factory defaults, the SD9030 Dongle is preset to
use the STAR 2.0 High Speed protocol. To enable the
communication between a Datalogic PowerScan
STAR 2.0 Scanner and a SD9030 Dongle, please be
sure about which protocol is currently in use on
both devices. Use the barcode below in case you
need to restore the scanner with the same default
protocol used by the SD9030 Dongle.