Datalogic SD9030, Quick Reference Manual, Page: 6 / 24

Installation
2 SD9030 Dongle
Installation
To set up your SD9030 Dongle you must:
1. Physically install the SD9030 Dongle.
2. Make all system connections.
3. Configure the SD9030 Dongle.
Mounting the SD9030 Dongle
The package contains the following items:
The forklift mount is designed to ease the installation of
the dongle on a lateral guard or on the overhead guard of
a forklift.
The forklift mount can be easily fastened to the dongle by
following few steps:
1. Unscrew the highlighted nut at the bottom and free it
completely from the cable of the dongle. Place the nut
in a safe place.
2. Pass the cable of the dongle through the biggest hole
of the mount and hold the dongle as shown in figure.
Remember that the best radio range is achieved by
placing the antenna as far as possible from metal
parts.
Best radio range Space Saving Position
• SD9030 Dongle • 2 Adhesive linking labels
• 1 Forklift mount • SD9030 Quick Reference Guide