1
S70 Analogue Output
Advanced sensor with dual digital displays
for use with plastic and glass fiber optic assemblies
For complete technical information about this product, including dimensions, accessories, and specifications, see
www.datalogic.com
.
Figure
1
Model
Sensing Beam Color
Reference Sensing Range
1
Outputs
Connector
S70-5-E3-PV/NV
Visible Red
2250 mm
Voltage and PNP or
NPN
Discrete
4-pin,
M8 Pico-style
S70-5-E3-PI/NI
Current and PNP or
NPN
Discrete
1
NOTE: Maximum sensing range in opposed mode at 12 ms response speed using 1mm diameter core plastic fiber.
CONNECTIONS
NPN Version
PNP Version
NOTE: Open lead wires must be connected to a terminal block.
1
Analogue and Discrete Output LEDs
2
CH1/CH2 Switch
3
RUN/PRG/ADJ Mode Switch
4
Lever Action Fiber Clamp
5
Red Signal Level
6
Green CH1 Analog Output
Signal or CH2 Threshold
7
+/SET/- Navigation key
Key
1 = Brown
2 = White
3 = Blue
4 = Black
WARNING: Not to be used for personnel protection
Never use this device as a sensing device for personnel protection.
Doing so could lead to serious injury or death.
This device does not include the self-checking redundant circuitry
necessary to allow its use in personnel safety applications.
A sensor failure or malfunction can cause either an energized or de-energized sensor output condition.
LOAD
LOAD
A_Out
D_Out
Input wire
+
10-30 VDC (Current models)
12-30 VDC (Voltage models)
1
3
2
4
LOAD
LOAD
A_Out
D_Out
Input wire
+
10-30 VDC (Current models)
12-30 VDC (Voltage models)
1
3
2
4