Datalogic QuickScan QS6500, Product Reference Manual

Page: 99 / 336

UPC-E
Product Reference Guide 6-11
UPC-E
The following options apply to the UPC-E symbology.
Disable/Enable UPC-E
When disabled, the imager will not read UPC-E bar codes.
Checksum Transmission
Enable this option to transmit the checksum along with UPC-E bar code
data.
Truncate/Expand
None —
Turns off the truncation/expansion features listed below.
Truncate NSD — The Number System Digit (NSD) which is usually a
zero (0) in the leading position can be truncated (excluded) from
scanned bar code data.
Expand UPC-E to EAN13 —
Adds a leading zero to a UPC-E bar
code which ‘expands’ the data to the EAN-13 data format. Selecting this
feature also changes the symbology ID to match those required for EAN-
13.
Expand to UPC-E to UPC-A —
Adds a leading zero to a UPC-E bar
code which ‘expands’ the data to the EAN-13 data format. Selecting this
feature also changes the symbology ID to match those required for EAN-
13.
NOTE
Has no affect on the
Truncate Leading/Ending
feature.
To turn it off, set leading/ending values to 00.