Datalogic QuickScan QS6500, Product Reference Manual

Page: 34 / 336

General Features
3-16 QuickScan
®
QS6500/QS6500BT
Global Features
Global Minimum Code Length
Global minimum length can be set to qualify data entry. The length is
defined as the actual bar code data length to be sent. bar code labels with
lengths exceeding these limits will be rejected. Ensure that the mini-
mum-length setting is no greater than the maximum-length setting; oth-
erwise, the labels of the symbology will not be readable. In particular,
you can set the same value for both minimum and maximum lengths to
force decoding of only fixed-length bar codes. This setting has no effect
on certain symbologies of fixed length.
START
MODE BARCODE
Global Minimum length can be set from 0 to 255. To
set this feature, scan the “START” bar code above to
place the unit in Programming Mode, then the “Set
Global Minimum Length,” followed by the digits from
the Alphanumeric table in
Appendix B, Alpha-
Numeric Pad
representing your desired minimum
length. Accept your selection by scanning the “SET”
bar code below and finally, exit programming mode by
scanning the “END” barcode below.
DEFAULT SETTING FOR THIS FEATURE: 4
Set Global
Minimum
Length
SET
END