background image

RS-232/USB-COM SETTINGS

ENTER/EXIT PROGRAMMING MODE

PRODUCT REFERENCE GUIDE   

29

ACK NAK Options

This enables/disables the ability of the reader to support the RS-232 ACK/NAK protocol.
When configured, the reader and/or host sends an “ACK” when it receives data prop-
erly, and sends “NAK” when the data is in error.

Options are:

Disable

Enable for label transmission — The reader expects an ACK/NAK response from
the host when a label is sent.

Enable for host-command acknowledge — The reader will respond with ACK/NAK
when the host sends a command.

Enable for label transmission and host-command acknowledge

 

ACK/NAK Protocol = Disable ACK/NAK

$CR2AE00

$CR2AE01

ACK/NAK Protocol = Enable for label transmission

ACK/NAK Protocol = Enable for host-command

acknowledge

$CR2AE02

$CR2AE03

ACK/NAK Protocol = Enable for label transmission and 

host command acknowledge

Summary of Contents for QuickScan QD2590
















































































































































































































































































































Reviews: