QSG rev.3
Setting Up the DxHub
1
For use under Emergency Use Authorization only
● Unpack the DxHub and set up on a
stable, level bench, in a clean
environment.
●
Configure the power supply for your
region.
●
Connect the 12V power supply to the
DxHub’s rear port.
●
Press the power button for one
second to power up and start the
instrument.
●
When desired, press and hold the
power button for 3 seconds to shut
down.
●
The loading screen will be
displayed and the instrument will
perform a self test.
●
If an error is found, refer to the
DxHub user manual for further
instruction.
●
On the DxHub touchscreen, select
the “Login” icon
●
Enter username and password if
requested.
●
First-time login only:
The user will
be required to login using “admin” as
the default username AND
password.
●
First-time login only:
After first
login using the default username and
password, the user is prompted to
change the password.
●
Enter a new admin password.
Touch
✔
to confirm. Touch
✘
to
cancel.
●
Re-enter the new admin password.
1
2
3
4
5
6
DxHub
Quick Start Guide
