Codabar
Product Reference Guide
181
ENTER/EXIT PROGRAMMING MODE
Codabar Set Length 2
This feature specifies one of the bar code lengths for
. Length 2 is
the maximum label length if in
Mode, or the second fixed length if in
Mode. The length includes the bar code’s start, stop, check and data characters. The
length must include at least one data character.
The length can be set from 3 to 50 characters. A setting of 00 specifies to ignore this length
(only one fixed length). See
for more detailed programming
instructions.
$CCBL2
Select CodabarLength 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and not
save the entry string. You can then start again at the beginning.
~
CANCEL
DEFAULT
50 = Length 2 is 50 Characters
Summary of Contents for QuickScan Lite 21 Series
