Datalogic QuickScan i, Product Reference Manual

Page: 15 / 388

Product Reference Guide 5
Chapter 2
Getting Started
About the Imager
Advancements in the LED technology used in this imager significantly improve the illu-
mination of the target field of view, resulting in higher scan efficiency. Whether used in
Single Trigger or Continuous Mode, the ergonomic design of the imager will help to
promote comfortable handling during extended periods of use.
The imager can communicate using the following interfaces:
RS-232 —
The imager can communicate with a standard or Wincor-Nixdorf (W-N)
RS-232 host.
RS-232 OPOS —
This interface is used for OPOS/UPOS/JavaPOS systems.
Keyboard Wedge (KBW) —
When connected using this interface, the host interprets
scanned data as keystrokes and supports several international keyboards (for the Win-
dows
®
environment). See
Country Mode on page 68
for a full listing.
USB —
Select to communicate either by USB OEM, USB COM, USB Keyboard inter-
face or USB POS types by scanning the appropriate interface type barcodes available in
this manual. The default interface is USB-KBD for Wedge models (7230) and USB-
OEM for IBM models (7210).
IBM —
IBM Port 5B or Port 9B are selectable interface options.
Wand Emulation —
This interface produces an electrical signal that represents the bars
and spaces of a label.
Unpacking
Check carefully to ensure the imager and any accessories ordered are present and undam-
aged. If any damage occurred during shipment, contact
Technical Support on page 3
.
KEEP THE PACKAGING. Should the unit ever require service, it should be returned
in its original shipping container.