Datalogic QBT2101-BK-BTK+, Product Reference Manual

Page: 302 / 360

292 QuickScan™ I QD21X1 / QM21X1 / QBT21X1
characters in Appendix D, Keypad representing your desired character(s). If less
than the expected string of 20 characters are selected, scan the ENTER/EXIT bar
code to terminate the string. Reference the section, "Example: Setting a Prefix" on
page 291, for more information. Exit programming mode by scanning the
ENTER/EXIT bar code once again.
Global AIM ID
AIM label identifiers (as opposed to custom characters you select yourself as
with label identifiers) can be included with scanned bar code data. AIM label
identifiers consist of three characters as follows:
• A close brace character (ASCII ‘]’), followed by...
• A code character (see the table below), followed by...
• A modifier character (the modifier character is symbol dependent).
SYMBOLOGY CHAR SYMBOLOGY CHAR
UPC/EAN
E
a
Code 128/GS1-128 C
Code 39 and

Code 32
A
GS1 DataBar Omnidirec-
tional, GS1 DataBar
Expanded
e
Codabar
F
Standard 2 of 5
S
Interleaved 2 of 5 I ISBN
X
b
Code 93
G
Code 11
H
Figure 11. AIM ID
Prefix Suffix Label ID Label ID Bar Code Data AIM ID
NOTE
This feature enables/disables addition of AIM IDs for all sym-
bology types.
a. UPC-A a nd UPC-E labels are converte d to EAN 13 whe n a dding AIM
IDs .
b. ISBN (X with a 0 modifier character)