Datalogic PowerScan PM8300 Product Reference Manual Download Page 8

Page: 8 / 92

Compatibility with PM8300

PowerScan™ PD9330/PBT9300/PM9300

5. Exit and Save Configuration

6. Read the Bind code to pair the PowerScan™ M8300 to the BC-80X0

cradle. The reader is dedicated to the cradle. Any previously bound

reader will be excluded.

To connect several readers to the same cradle see the following paragraph

‘Using Multiple M8300 Series Readers with Same Cradle'.

Bind

The green LED on the PowerScan™ M8300 will blink; the reader is ready to
be inserted into the cradle.

7. Firmly insert the reader into the BC-80X0 cradle within 10 seconds,

a beep will be emitted, signaling that the BC-80X0 cradle has been

paired to the PowerScan™ M8300, and the green LED on the reader

will go off.

green LED

8. Read the BC-80X0 restore default code:

Restore BC-80X0 Default

Go to INTERFACE SELECTION on page

Summary of Contents for PowerScan PM8300





























































































Search results

Summary of Contents for PowerScan PM8300

Reviews:

Related manuals for PowerScan PM8300

Brands by name

Popular brands

Datalogic PowerScan PM8300, Product Reference Manual

Search results

Summary of Contents for PowerScan PM8300

Reviews:

Related manuals for PowerScan PM8300

Brands by name

Popular brands