Using the PowerScan™ PM8300-DK
4
PowerScan™ PM8300-DK 16-Key Reader
Aiming System
PowerScan
™
PM8300-DK provides an aiming system. If enabled, a partial trigger
press produces a red spot, which should be aimed over the code center to get the
best reading performance, see #1 in the figure above. By completely pressing the
trigger the scan line appears to start the code scanning, see #2.
After setting up the reader, you can enable or disable the aiming system by reading
the codes below:
Disable Aiming System (Default)
Ì$+Bj0$-"Î
Enable Aiming System
Ì$+Bj1$-'Î
