PowerScan™ PM8300-DK Configuration
Quick Reference Guide
11
END of procedure. YOUR READER IS NOW READY TO READ CODES.
6.
Exit and Save Configuration
Ì$-?Î
7.
Read the
Bind
code to pair the PowerScan
™
PM8300-DK to the BC-80X0 cradle.
The reader is dedicated to the cradle. Any previously
bound
reader will be
excluded.
To connect several readers to the same cradle see the following section "Using
Multiple Readers with Same Cradle".
Bind
Ì$+RN0$-IÎ
The green LED on the PowerScan
™
PM8300-DK will blink: the reader is ready to
be positioned onto the cradle.
8.
Firmly position the reader onto the cradle within 10 seconds, a beep will be
emitted, signaling that the BC-80X0 cradle has been paired to the PowerScan
™
PM8300-DK, and the green LED on the reader will go off.
9.
Configure the BC-80X0 cradle, refer to the “BC-80X0 Quick Reference”.
Green LED
