Datalogic PowerScan PM8300-DK Quick Reference Manual Download Page 10 | Manualshive

Page: 10 / 28

Datalogic PowerScan PM8300-DK Quick Reference Manual Download Page 10

Setup

8

PowerScan™ PM8300-DK 16-Key Reader

Setup

PowerScan

™

PM8300-DK/BC-80X0 Point-to Point Configuration

1.

Connect a BC-80X0 cradle to the Host. For installation and connection
information see the BC-80X0 Quick Reference Manual.

2.

Charge the PowerScan

™

PM8300-DK battery using an BC-80X0 or the

C-8000 charger as described in this Quick Reference manual. A full
charge takes 4 hours if using an external power supply; while it takes up
to 10 hours if supplying power through the USB port.

3.

Configure the reader as described in this Quick Reference -
PowerScan

™

PM8300-DK/BC-80X0 Point-to-Point Setup.

4.

Configure the BC-80X0 cradle. See BC-80X0 Configuration in the
BC-80X0 Quick Reference.

or

PowerScan

™

PM8300-DK/BC-80X0 Stand Alone Configuration

1.

Connect an BC-80X0 cradle to the Host. For installation and connection
information see the BC-80X0 Quick Reference Manual.

2.

Charge the PowerScan

™

PPM8300-DK battery using an BC-80X0 or

the
C-8000 charger as described in this Quick Reference manual. A full
charge takes 4 hours if using an external power supply; while it takes up
to 10 hours if supplying power through the USB port.

3.

Configure the reader as described in this Quick Reference -
PowerScan

™

PM8300-DK/BC-80X0 Stand Alone Setup.

4.

Configure the BC-80X0 cradle. See BC-80X0 Configuration in the
BC-80X0 Quick Reference.

or

PowerScan

™

PM8300-DK/STAR-System™ Configuration

1.

Charge the PowerScan

™

PM8300-DK battery using an BC-8000 or the

C-8000 charger as described in this Quick Reference manual. A full
charge takes 4 hours if using an external power supply; while it takes up
to 10 hours if supplying power through the USB port.

2.

Configure the reader as described in this Quick Reference
PowerScan

™

PM8300-DK/STAR-System™ Setup.

«
...
8
9
10
11
12
...
»

Summary of Contents for PowerScan PM8300-DK





























Reviews:

No comments