Cleaning Procedure
26
POWERSCAN™ PM96XX
CLEANING PROCEDURE
Proper cleaning is needed on the external plastic surfaces,
output window and electrical contacts to guarantee reli
-
able scanning and charging of the battery.
A regular cleaning routine will remove the dust and dirt
that may accumulate on the product over time. The main
-
tenance activity may be repeated more frequently
depending on the severity of the environment in which
the scanner is used.
A periodic deeper cleaning is suggested once per month.
Cleaning plastic surfaces
Exterior surfaces and scan windows exposed to spills,
smudges or debris accumulation require periodic cleaning
to ensure best performance during scanning operations.
Follow the procedures described in this instruction sheet
to keep your PowerScan™ device in good operating condi
-
tion.
Common Cleaning Solutions
The cleaners and disinfectants listed below are recom
-
mended for use on Datalogic Disinfectant-Ready Enclo
-
sures:
WARNING: Be sure to turn off power and unplug
the device from electrical outlet before cleaning.
CAUTION: DO NOT use abrasive pads or cleaning
agents.
PRODUCT
CHEMICAL CONTENT
Sani-Cloth® HB,
Sani-Cloth® Plus,
Super Sani-Cloth®
Quaternary Ammonium Chloride
solution
Hepacide Quat II
Virucidal disinfectant cleaner
Alcohol Wipes
70% Isopropyl Alcohol
CaviWipes™
lsopropanol 10-20%; Ethylene Glycol
Monobutyl Ether 1-5%
Virex® 256
n-Alkyl Dimethyl Benzyl Ammonium
Chloride; Didecyl Dimethyl Ammonium
Chloride
Formula 409® Glass and
Surface Cleaner
n-Alkyl Dimethyl Benzyl Ammonium
Chloride; n-Propoxypropanol
