background image

Data Editing

Product Reference Guide

291

Data Editing 

When a bar code is scanned, additional information can be sent to the host 

computer along with the bar code data. This combination of bar code data 

and supplementary user-defined data is called a “message string.” The Data 

Editing features can be used to build specific user-defined data into a mes-

sage string.
There are several types of selectable data characters that can be sent before 

and after scanned data. You can specify if they should be sent with all sym-

bologies, or only with specific symbologies. Figure 7 shows the available 

elements you can add to a message string:

Figure 7. Breakdown of a Message String

Prefix

Suffix

AIM ID

Label ID

Label ID

Bar Code Data

00 - 20 Characters (ASCII)

Label ID Transmission:

Enable this option to 

transmit the Label ID you 

configure for the scanned 

symbology.

AIM ID: This function is used to identify and display the 
common label identifier for its symbology. When enabled, 
this ID code will be transmitted before the scanned bar 
code data.

OR...

Additional advanced editing is available. See the Advanced formatting

 

features in the Datalogic Aladdin configuration software, or contact 
Technical Support (as described on 

page 2

) for more information.

Please Keep In Mind...

• Modifying a message string is not a mandatory requirement. 

Data editing is a sophisticated feature allowing highly custom-

izable output for advanced users. Factory default settings for 

data editing is typically set to NONE.

• A prefix or suffix may be applied only to a specified symbol-

ogy (reference 

1D Symbologies, starting on page 83

 or 

2D 

Symbologies, starting on page 175

 ) or across all symbologies (set 

via the Global features in this chapter).

• You can add any character from the 

ASCII Chart

 (from 00-FF) on 

the inside back cover of this manual as a prefix, suffix or Label 

ID.

Enter prefixes and suffixes in the order in which you want 

them to appear on the o

utput.

Summary of Contents for PowerScan 9501-AR Series











































































































































































































































































































































































Reviews: