background image

Enter/Exit Programming Mode

240

PowerScan™ PD9531-AR/PBT9501-AR/PM9501-AR

Radio Sleep

Disables the radio when the scanner is in standby mode in order to save the 

battery power. When Radio sleep is enabled, the scanner cannot receive 

asynchronous messages nor paging button requests from the base. The 

scanner is still able to receive ACK From Host message. See 

"STAR Radio 

Transmit Mode" 

on page 239.

DEFAULT

Radio Sleep = Sleep Disable

Radio Sleep = Sleep Enable

Changing System Speed 

1. Link the PM9501-AR with a BC9xxx Base. 

2. With the PM9501-AR, read a “Compatible Mode/Normal Mode Speed” 

programming label on 

page 243

 to set “Low, Medium, or High Speed”.

3. Place the PM9501-AR into the BC9xxx. 

The Reader and Base will now be linked at the new programmed speed.
This feature can also be programmed using Datalogic Aladdin.

1. On the BC9xxx Base, change the Compatible mode parameter to low, 

intermediate, or high speed through Aladdin.

2. Place an unlinked PM9501-AR onto the BC9xxx base. 

The Reader and base will link at the new programmed speed.

Summary of Contents for PowerScan 9501-AR Series











































































































































































































































































































































































Reviews: