OUTPUTS
PRODUCT REFERENCE GUIDE
23
INPUT 3 CONNECTIONS (CBX500 Only)
Figure 10 - Input 3 Using External Power
OUTPUTS
The outputs are programmed using VPM.
1. Start VPM
2. Select the General icon.
3. Select the Communication button.
4. Select NPN for the output type.
Outputs are typically used either to signal the data collection result or to control an
external lighting system.
NOTE
Do not connect to I3A or I34B signals, they are reserved.
NOTE
When Outputs 1 and 2 are connected through the CBX connection box, you
must set the Output Type configuration parameters to NPN.
CBX500/800
FUNCTION
+V
Power Source - Outputs
O1+
Output 1 + opto-isolated and polarity sensitive
O1-
Output 1 - opto-isolated and polarity sensitive
O2+
Output 2 + opto-isolated and polarity sensitive
O2-
Output 2 - opto-isolated and polarity sensitive
