Datalogic Memor 10, User Manual

Page: 171 / 188

Safety and Regulatory Information
User’s Manual 165
maintain a 5mm separation distance between the user's body and
the handset, including the antenna. The use of belt clips, holsters
and similar accessories should not contain metallic components in
its assembly. The use of body-worn accessories that do not meet
these requirements may not comply with RF exposure requirements
and should be avoided.
FCC RF Exposure Information and Statement:
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of
tissue. Device types: U4GDL35US has also been tested against this
SAR limit. The highest SAR value reported under this standard
during product certification for use at the ear is 0.801W/kg and
when properly worn on the body is 1.172W/kg and as hotspot is
1.283W/kg. This device was tested for typical body-worn operations
with the back of the handset kept 1cm from the body. To maintain
compliance with FCC RF exposure requirements, use accessories
that maintain a 1cm separation distance between the user's body
and the back of the handset. The use of belt clips, holsters and
similar accessories should not contain metallic components in its
assembly. The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure requirements,
and should be avoided.
The device for operation in the band 5150-5250 MHz is only for
indoor use to reduce the potential for harmful interference to
co-channel mobile satellite systems.
In radio systems configured with mobile computers and access
points, the frequencies to be used must be allowed by the spectrum
authorities o fthe specific country in which the installation takes
place. Be absolutely sure that the system frequencies are correctly
set to be compliant with the spectrum requirements of the country.
The Radio modules used in this product automatically adapt to the
frequencies set by the system and do not require any parameter
settings.