Datalogic Magellan 1500i, Product Reference Manual

Page: 147 / 346

UPC-E ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
137
Expand UPC-E to UPC-A
Enables/disables expansion of UPC ‐ E labels to UPC ‐ A.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar ‐
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
barcode.
004100(CR)
Expand UPC-E to UPC-A = Disable
004101(CR)
Expand UPC-E to UPC-A = Enable
DEFAULT