Datalogic Magellan 1500i, Product Reference Manual, Page: 207 / 346

CODE 39 ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
197
Code 39 Start Stop Character Transmission
Enables/disables transmission of Code 39 start and stop characters.
NOTE
This item is ignored when the advanced feature, Full Label Edit,
is enabled
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar ‐
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode barcode.
022400(CR)
Code 39 Start Stop Character Transmission = Disable
022401(CR)
Code 39 Start Stop Character Transmission = Enable
DEFAULT