Datalogic Magellan 1500i, Product Reference Manual

Page: 240 / 346

ENTER/EXIT PROGRAMMING MODE
230
MAGELLAN™ 1500I
Codabar Check Character Calculation
Enables/disables calculation and verification of an optional Codabar check character.
NOTE
If check character calculation is disabled, the risk is increased
that a misread can occur. When disabled, any check characters in
a barcode are treated as data characters.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar ‐
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode barcode.
007100(CR)
Codabar Check Character Calculation = Disable
007101(CR)
Codabar Check Character Calculation = Enable
DEFAULT