Datalogic Magellan 1500i, Product Reference Manual

Page: 151 / 346

EAN-13 ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
141
EAN-13 First Character Transmission
Enables/disables transmission of EAN/JAN ‐ 13 first character.
NOTE
This item is ignored when the advanced feature, Full Label Edit,
is enabled.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar ‐
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
barcode.
024400(CR)
EAN-13 First Character Transmission = Disable
024401(CR)
EAN-13 First Character Transmission = Enable
DEFAULT