Datalogic GWY-01-PBS-01, Reference Manual

Page: 36 / 101

GWY-01-PBS-01
28
4
Command ID Command Name Description
0x1C Get Subnet Baud Rate
Retrieves the baud rate of the Subnet
network
0x21 Set Gateway Name
Writes to flash memory, a user-defined
“friendly” name for the Gateway
0x24 Set Notification Mask
Used to customize or modify the
Gateway’s 16-bit Notification Mask
0x26 Set Gateway Time
Used to set the Gateway’s internal clock
and calendar
0x2C Set Subnet Baud Rate
Used to modify and store changes to the
Subnet network baud rate
RFID Controller Commands
0x30 Get Controller Name
Retrieves the controller’s user-defined
name
0x33 Get Controller Configuration
Retrieves the controller’s configuration
settings
0x38 Get Controller Info
Retrieves hardware, firmware and serial
number information from the controller
0x40 Set Controller Name
Used to set (create or modify) the user-
defined name for the controller
0x43
Set Controller Configuration
Used to set (configure or modify) the
controller’s configuration parameters and
settings
0x4E Set Controller Time Used to set the time for the controller
0x53 Initialize Controller
Removes all configuration settings stored
for the controller
0x54
Reset Controller Resets power to the controller
Gateway Subnet Commands
0x60 Initialize Gateway
Clears all Subnet Node configuration
information stored in the Gateway’s flash
memory
0x61 Reset Gateway
Performs an electrical reset of the
Gateway
0x62 Initialize All Nodes
Removes all stored configuration
information for all nodes and reconfigures
them to factory defaults
0x63 Initialize All Node Macros
Removes all stored macros from all
nodes
0x70 Start Subnet
Instructs the Gateway to begin “polling”
the Subnet network
0x71 Move Controller
Used to move all stored configuration
data for a particular Node ID to another
specified Node ID