Datalogic Gryphon I GFE4500 Product Reference Manual Download Page 22

Page: 22 / 312

SETUP

GRYPHON™ GFS4500

Video Tutorial

CONNECTING THE HOST INTERFACE

The reader can communicate using the interfaces illustrated on

page 10

For USB model, connect the reader cable as shown in "

Attaching and Retaining the USB

Cable (GFS4520 Model Only)" on page 6

RS-232 Serial Connection

Turn off power to the terminal/PC and connect the reader to the terminal/PC serial port

via the RS-232 cable as shown in

Figure 5

. If the terminal will not support POT (Power

Off the Terminal) to supply reader power, use the approved power supply (AC Adapter).

Plug the AC Adapter barrel connector into the socket on the RS-232 cable connector and

the AC Adapter plug into a standard power outlet.

RS-232:

The reader can communicate with a standard or Wincor-Nixdorf (W-N) RS-232

host.

RS-232 OPOS:

This interface is used for OPOS/UPOS/JavaPOS systems.

Summary of Contents for Gryphon I GFE4500

























































































































































































































































































































Search results

Summary of Contents for Gryphon I GFE4500

Reviews:

Related manuals for Gryphon I GFE4500

Brands by name

Popular brands

Datalogic Gryphon I GFE4500, Product Reference Manual

Search results

Summary of Contents for Gryphon I GFE4500

Reviews:

Related manuals for Gryphon I GFE4500

Brands by name

Popular brands