Datalogic Gryphon I GFE4500 Product Reference Manual Download Page 20

Page: 20 / 312

SETUP

GRYPHON™ GFS4500

PARTS OF THE READER

The LED on the reader provides information about the data transmission.

ATTACHING AND RETAINING THE USB CABLE (GFS4520

MODEL ONLY)

1. While pressing the retainer’s locking wings, slide to pull it out of its housing.

2. Rotate the retainer clockwise and insert the USB cable.

3. Set back the retainer by rotating it counterclockwise and push until the cable is

firmly locked.

1. Power/Status LEDs

3. Scan Window

2. Beeper Output

4. Trigger

5. USB Cable Retainer (Only for GFS4520)

NOTE: Different microUSB cable sizes can be used. Ensure the connector

shell size does not exceed 18.0 mm (w), 7.0 mm (h), 10.8 mm (d). Use only

straight USB connectors, do not use right-angled connectors.

Summary of Contents for Gryphon I GFE4500

























































































































































































































































































































Search results

Summary of Contents for Gryphon I GFE4500

Reviews:

Related manuals for Gryphon I GFE4500

Brands by name

Popular brands

Datalogic Gryphon I GFE4500, Product Reference Manual

Search results

Summary of Contents for Gryphon I GFE4500

Reviews:

Related manuals for Gryphon I GFE4500

Brands by name

Popular brands