Datalogic Falcon 4420 26-Key Quick Reference Download Page 45

Page: 45 / 68

Troubleshooting

Quick Reference Guide

Troubleshooting

Refer to the

Falcon 4400 with Windows Mobile

PRG

for more information.

Table 7. Troubleshooting Problems, Causes, and Solutions

Problem

Possible Cause

Solution

The Falcon does not turn
on.

The battery pack is not installed
properly.

Ensure the battery is installed properly.

The battery is not fully charged. Insert the Falcon in dock and begin charging. The bat-

tery pack and backup battery require 24 hours to fully
charge at first use, and 4 hours thereafter.

System failure.

Perform a Hard Reset. Refer to Resetting the Falcon
starting on page

Rechargeable battery pack
did not charge.

Battery failure.

Replace the battery. If the Falcon terminal still does not
operate, try a Hard Reset. Refer to Resetting the Fal-
con starting on page

The Falcon was removed from
the dock while battery was
charging.

Insert the Falcon in dock and begin charging. The bat-
tery pack and backup battery require 4 hours to fully
charge.

Characters are not visible
on the display.

The Falcon is not powered on.

Press

<POWER>

The ambient room light is too
dark or low.

Turn on the backlight. Refer to the

PRG.

No sound is audible.

Volume setting is low or turned
off.

Adjust the sound volume by going to the Volume icon
on the Task bar at the top of the screen.

The expected sound is not con-
figured in the software.

Ensure that sounds are enabled by tapping

Settings > Personal > Sounds & Notifications,

> Settings > System > Decoding

for sounds

related to bar code scanning.

Scan the appropriate bar code from the

PRG

The Falcon turns itself off.

The Falcon is inactive.

The Falcon turns off after a period of inactivity. You can
set duration from one to 30 minutes. Refer to the

PRG

to modify the default settings.

The Falcon will not accept
input from the stylus or the
keypad.

A software application is “hung.” Tap

> Settings > System > Memory >

Running Programs.

Select the problematic pro-

gram(s) and tap

Stop

, or

Stop All

to stop all running

programs.

System failure.

Perform a Hard Reset. Refer to Resetting the Falcon
starting on page

Summary of Contents for Falcon 4420 26-Key





































































Search results

Summary of Contents for Falcon 4420 26-Key

Reviews:

Related manuals for Falcon 4420 26-Key

Brands by name

Popular brands

Datalogic Falcon 4420 26-Key, Quick Reference

Search results

Summary of Contents for Falcon 4420 26-Key

Reviews:

Related manuals for Falcon 4420 26-Key

Brands by name

Popular brands