Datalogic DLR-PR001 Series Quick Reference Manual Download Page 3 | Manualshive

Page: 3 / 28

Datalogic DLR-PR001 Series Quick Reference Manual Download Page 3

Quick Reference Guide

i

Table of Contents

END USER LICENSE AGREEMENT  ................................................ iii
Software Product Policy  ................................................................ vi
Product Description  ........................................................................ 1
General Features ............................................................................. 2
Getting Started  ................................................................................ 2

Connecting to the Reader Using the Serial Port ................. 3
Connecting to the Reader via Ethernet ............................... 3
Mechanical Dimensions and Installation Notice ................ 4
Kit and Accessories ................................................................ 5

External Interfaces Description ..................................................... 6

Connectors .............................................................................. 6

Power Supply Connector ..............................................  6
RS232 Port.....................................................................  7
Ethernet Port.................................................................  8
USB Host Ports .............................................................  9
GPIO Port ..................................................................... 10
RFID Antenna Ports.................................................... 11
LEDs ............................................................................. 11

DLR-PR001-XX Configuration ............................................12
Restore Factory Default Settings .......................................12

Technical Specifications ...............................................................13
Datalogic Limited Factory Warranty ...........................................15
Support Through the Website .....................................................18

«
1
2
3
4
5
...
»

Summary of Contents for DLR-PR001 Series





























Reviews:

No comments