Datalogic DLL2020-WO, User Manual, Page: 18 / 30

14 Installing the DLL2020-WO
2.1 Installing the scanner
This chapter describes the instructions necessary for installing the
DLL2020-WO scanner.
Due to many POS systems on the market, a large number of
communication cables is available. Make sure that you have the right
cable to connect the scanner to your POS or computer.
Follow these steps carefully in order to install the scanner.
1. Locate the optimal scanner position in relation to the counter surface.
Pay attention to the product flow, the distance to the counter edge and
convenience for the operator.
■
The scanner and the host system must be switched off before
starting the installation of the scanner. By following this precaution
you prevent any electrical damage.
■
You are advised to install the scanner in an air circulated place out
of direct sunlight.
NOTES