Datalogic Cobalto C05300, Product Reference Manual, Page: 167 / 292

Codabar Enter/Exit Programming Mode
Product Reference Guide 155
Codabar Set Length 2
This feature specifies one of the bar code lengths for
Codabar Length Control
. Length 2 is
the maximum label length if in
Variable Length
Mode, or the second fixed length if in
Fixed
Length
Mode. The length includes the bar code’s start, stop, check and data characters. The
length must include at least one data character.
The length can be set from 3 to 50 characters. A setting of 00 specifies to ignore this length
(only one fixed length). See
"Set Length 2"
on page 241 for more detailed programming
instructions.
Select Codabar Length 2 Setting
To configure this feature, scan the ENTER/EXIT bar
code above, then the bar code at left followed by dig-
its from the Alphanumeric characters in
Appendix D,
Keypad
representing your desired character(s). End
by scanning the ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
CANCEL
DEFAULT
50 = Length 2 is 50 Characters
$CCBL2
~