Datalogic Cobalto C05300, Product Reference Manual

Page: 141 / 292

Code 128 Enter/Exit Programming Mode
Product Reference Guide 129
Code 128 Set Length 2
This feature specifies one of the bar code lengths for
Code 128 Length Control
. Length 2 is
the maximum label length if in
Variable Length
Mode, or the second fixed length if in
Fixed
Length
Mode. Length includes the bar code’s data characters only.
The length can be set from 1 to 80 characters. A setting of 00 specifies to ignore this length
(only one fixed length). See
"Set Length 2"
on page 241 for more detailed programming
instructions.
Select Code 128 Length 2 Setting
To configure this feature, scan the ENTER/EXIT bar
code above, then the bar code at left followed by dig-
its from the Alphanumeric characters in
Appendix D,
Keypad
representing your desired character(s). End
by scanning the ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
CANCEL
DEFAULT
80 = Length 2 is 80 Characters
Code 128 Stitching
This option enables/disables stitching for Code 128 labels. When parts of a Code 128 bar code
are presented to the scanner with this feature enabled, the bar code parts will be assembled
by the scanner’s software, and the data will be decoded if all bar code proofing requirements
are met.
Code 128 Stitching = Disable
Code 128 Stitching = Enable
DEFAULT
$CC8L2
~
$CC8ST00 
$CC8ST01 