Datalogic Arex 30W, User Manual

Page: 8 / 96

viii
TABLE OF CONTENTS
SYMBOLS III
REVISION INDEX IV
FOREWORD V
OVERVIEW VI
OPERATION OF A LASER SYSTEM WITH GALVANOMETRIC SCANNING vi
LASER SOURCE vi
GALVANOMETRIC SCANNING HEAD vi
MARKING SOFTWARE vi
IMPORTANT WARNINGS vii
TABLE OF CONTENTS VIII
1 CONTENTS OF THE PACKAGING 10
1.1 UNPACKING 10
1.2 MAIN HARDWARE 11
1.3 CABLE AND ACCESSORIES 11
1.4 TRANSPORT 12
1.5 ON MOISTURE CONDENSATION 12
1.6 FIXING AND POSITIONING 13
1.7 INSTALLATION ENVIRONMENT 15
1.8 FUME / DUST EXTRACTOR 15
2 TECHNICAL SPECIFICATIONS 16
2.1 TECHNICAL CHARACTERISTICS 16
2.2 DESCRIPTION OF THE LASER MODULES 18
2.2.1 SCAN HEAD 18
2.2.2 CONTROL RACK 19
2.3 MARKING AREA SPECIFICATION 20
2.4 CONNECTORS SPECIFICATIONS 22
2.4.1 INTERLOCK CONNECTOR 22
2.4.2 COMMAND BOX CONNECTOR (LASER CONTROL) 24
2.4.3 AXES CONNECTOR (I/O CONTROL) 29
2.4.4 RS232 CONNECTOR (COM2) 30
2.4.5 ENCODER CONNECTOR 31
2.4.6 PHOTOCELL CONNECTOR 31
2.5 INPUT/OUTPUT SIGNAL SPECIFICATIONS 32
2.6 CONNECTION EXAMPLE 33
3 INSTALLATION AND SET UP 34
3.1 CONNECTIONS 34
3.1.1 COMMAND BOX CONNECTOR CONNECTION 34
3.1.2 INTERLOCK CONNECTOR CONNECTION 35
3.1.3 POWER SUPPLY CABLE CONNECTION 36
3.1.4 GROUND CONNECTION 36
3.1.5 LOCAL MODE CONNECTION 37
3.1.6 REMOTE MODE CONNECTION 38
3.1.7 F-THETA LENS PROTECTION CAP REMOVAL 39
4 USE AND OPERATION 40
4.1 TURNING ON SEQUENCE 40
4.1.1 ADVICE ON USING THE SYSTEM 43
4.2 LOCAL MODE OPERATIONS 44
4.3 REMOTE MODE OPERATIONS 44
4.4 OPERATING IN LOCAL MODE 46
4.4.1 HOW TO CREATE AND EDIT YOUR FIRST GRAPHIC DOCUMENT 47