Datalogic Arex 30W, User Manual

Page: 7 / 96

vii
The Arex
TM
marking system features a power supply unit whose size is compatible with the standard 19”
2,5U in varnished steel, and a scan head whose compact dimensions make it easy to integrate into a system
that comprises safety systems required by applicable regulations, the management of marking signals and
the customer’s complementary modules, if any.
All marking system connections are found on the rear of the rack: mains power supply, safety, electrical
signals, communication ports, patch cord to the scanner head, while the front features key and enable
command devices, status LED in addition to a USB connector for communication with the internal embedded
controller.
Figure 1: Control Rack and Scan Head.
WARNING!
Laser marking may strongly interact with materials through a thermal carbonization process with the
emission of fumes and vapours.
Adequate fume extractor and fume treatment must be provided for, especially when working on
plastic materials such PVC.
IMPORTANT WARNINGS
Access to the internal parts of the marking system is allowed only to authorized personnel, duly qualified and
trained with regards to risks of optical and electrical nature.
Datalogic declines any and all responsibility for work carried out on live parts by untrained or unauthorized
personnel.
WARNING!
It is forbidden to change the intended use for which the system was designed and developed.
Datalogic declines any and all responsibility for improper use of its marking system.
WARNING!
These marking system actuation is demanded to the system integrator .