Sentry K300 Managed User Guide
changed, or when the Auto Lock timeout and Minimum Password length are being defined. Button
will function as
Down
on the
Selection
and
Menu
screens.
Hardware Reset
: Located between the four corners of eight (8), nine (9), power/backspace, and
enter. Press button lightly with a dull pin tip to perform a hardware reset on a device that has
become nonfunctional. This will reboot the drive if it becomes unresponsive.
Note:
Do not press this
button with a sharp object at the risk of puncturing the button.
Alpha-Numeric Buttons
: Secure passwords can be created using letters and/or numbers. Each
button has one number and three to four letter options to choose from. Press the selected button
repeatedly within 1 second until the desired character is shown in the white circle on the screen.
Unlocking Your Device
1. Press and hold the
Power
button on your Sentry K300 device until the OLED screen illuminates.
2. Enter the device password when prompted, then press
Enter
. For more information on button
functionality, see
3. The device will display connection options. For more information on screen selection, see
4. Select the appropriate option and press
Enter
to unlock the device.
Note:
If no selection is made in 60 seconds, the device will time out and power off.
5. Plug in the device. For more information, see
Screen Selection
After unlocking your Sentry K300 you will be presented with the following selections.
•
Connect:
The device will connect in normal read/write mode after plugging it into a compati-
ble system.
© 2019 DataLocker Inc. All rights reserved.
6
