DataHand Professional II, User Manual

Page: 59 / 70

SECTION 8
SPECIAL KEYS
User's Guide
,
Version 1.7.5
,
November 21, 2002
53
Sw a p Thu m b ‘U P’ K e y s :
From Program Mode (see User Guide, page 48) set the SWAP THUMB ‘up’
keys option
‘O’ .
Fo ot Pe da l S up por t
:
The Foot pedals become shifted accesses switches for FUNCTION and
NORMAL Mode direct access key. Call DataHand Systems to add the foot
pedal option. Foot pedals can also be used in macro programs.
PS /2 M o us e E na ble :
Any hand mouse if hot plugged (not recommended), will power up as
enabled. The DEK PS/2 mouse also powers up as enabled if reconnected
(not recommended).
D H - 2 0 0 M O D EL C OM P A T IB I LI TY:
This section for former DH200 users only.
From Program Mode, set the DH-200 command option ‘P’ . This new mode
still allows the use of the direct access switches but creates the chorded NAS
and FUNCTION Mode shifting that was used with the DH-200. The DH-200
keyboards came originally changed mode using a chorded key scheme.
There was no up thumb key. To select this option, press ‘;’ (semi colon) while
in Program Mode. An additional addendum is available for former DH-200
users to explain the DH-200 compatibility.
M a c I nt o s h U s e r s :
The MAC's COMMAND , CONTROL and POWER -ON Keys can be
programmed as follows:
MAC USB ADAPTER SETUP
:
The DataHand must first be set up as a 104 key keyboard so the WINDOWS
and APPLICATION Keys are available to the MAC Adapter. See Changing
Default Settings & Program Macros, page 48.
- Hold Left Thumb up and at the same time press the Square RESET
Button behind the left unit;
-
Release the RESET Button first and the Left Thumb Up--- the Red LED
on the right unit will be blinking;
-
Press the Rt. ENTER key (Right Ring East) --- the Green NAS light will