manualshive.com logo in svg

DataHand Professional II, User Manual

Share
Download
DataHand Professional II User Manual Download Page 2

ii

User's Guide

, 

Version 1.7.5

, 

November 21, 200

© Copyright 1997,

DataHand® Systems, Inc.
3032 North 33

rd

 Avenue

Phoenix, AZ 85017

All rights are reserved.  No part of this publication may be reproduced, stored in a retrieval system or
transmitted in any form or by any means, mechanical, photocopying, recording or otherwise, without the
prior written permission of DataHand® Systems, Inc.

DataHand® Systems is a registered trademark of DataHand® Systems, Inc.  Apple is a registered
trademark of Apple Computer, Inc.  IBM is a registered trademark of IBM Corporation.  Microsoft and
Windows are registered trademarks of Microsoft Corporation.

Neither DataHand® Systems, Inc. nor its affiliates shall be liable to the purchaser of this product or third
parties for damages, losses, costs or expenses incurred by purchaser or third parties as a result of:
accident, misuse or abuse of this product or unauthorized modifications, repairs or alterations to this
product.

DataHand® Systems, Inc. and its affiliates shall not be liable for any damages or problems arising from
the use of any options or any consumable products other than those designated as original DataHand®
Systems, Inc. products or DataHand® Systems, Inc. approved products.

Summary of Contents for Professional II







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands