MA1069 PWRM10-01 & PWRM20-01 Quick Start Guide
Page 3 of 15
3.0 Three Step Setup: Install
→
Connect
→
Acquire
Three simple steps are all that is required to start monitoring energy with the PWRM10-01 or
PWRM20-01 modules:
STEP 1 Installing the Module
o
Unpack the PWRM10-01 or PWRM20-01 module and mount it on a DIN rail
o
Wire the phase voltages and phase currents to be monitored to the terminal blocks
*The modules are powered by the phase voltages
–
separate power is not needed
o
Use a standard Ethernet cable for direct or network connection to a computer, tablet,
or smartphone
ATTENTION
Read, understand, and follow all instructions in this manual and
including all warnings, cautions, and precautions before installing and using
the product.
CAUTION
–
RISK OF ELECTRICAL SHOCK
When installing and operating the PWRM10-01 and PWRM20-01 modules, there is a potential shock
hazard from dangerous high voltage. Ensure systems are de-energized before installing the product
or removing the terminal blocks.
STEP 2 Connecting Communications to the Module
o
Download the PWRM Discovery Tool from the Dataforth website
PWRM Software & User Manual Download Center
o
Run the tool to identify all PWRMxx-xx modules connected direct or on a local
network
o
Double-click on a module to connect to it using a standard browser and the Web
Interface
STEP 3 Acquiring Data from the Module
o
Sensor Configuration in the Web Interface sets up the module to properly read
devices used for measuring phase currents and phase voltages
o
Data Display in the Web Interface displays real time data in tables
o
Data Charts in the Web Interface graphically display real time data
o
Logger in the Web Interface provides data logging
Sections 4.0, 5.0, and 6.0 respectively detail these steps.
